construction details

1= 84R panel
2= flush join profile
3= 84R carrier
4= rod hanger
5= carrier splice
6= panel splice

Characteristics

• Round edged panels with 16mm wide joints that enhance the linear appearance
• Panels combined with join profiles provide a visually closed ceiling

• Panels can be supplied in any length up to 6000 mm (as standard)
• Open joint system for any application requiring up to 16% open area: 16mm flush joint profile can be installed
• Optimal acoustic control by using perforated panels with closed joints and a non-woven textile membrane bonded to the inside face
• Panels are lightweight yet strong aluminium which can be recycled for the full 100%, requiring very little energy

• Demountable panels allowing full access to services and equipment in plenum Carriers for non-standard modules are available
• Panels can also be used for exterior application
• Base Material: Luxalon® 84R panels are rollformed from 0.5 mm thick prepainted stove enamelled aluminium strip, alloy HD5050 or equivalent (according to EN 1396 and ECCA standards)
• Coating: the tough and durable 2-layered polyester finish in a nominal thickness of approximately 20 microns, is stove enamelled in a continuous coil-coating process ensuring uniform coating thickness and absolute adhesion

Fire behaviour

Luxalon® metal suspended ceilings are classified incombustible and will therefore not contribute to possible fires. When ceilings however need to protect the structural integrity of the building, Luxalon® ceilings offer a range of practical and tested solutions with regards to fire resistance and fire stability. Further information is available on request.

Material per sqm

Construction details

Edge profiles

Edge profiles available for the 84R program