construction details

Characteristics

• All panels can be clipped onto an integrated carrier
• The combination of narrow and wider panels on one carrier offer various dimensional effects

• Panels combined with join profiles provide a visually closed ceiling
• Panels can be supplied in any length up to 6000 mm (as standard)
• Open joint system for any application requiring up to 20% open area
• Optimal acoustic control by using perforated panels with closed joints and a non-woven textile membrane bonded to the inside face
• Panels are lightweight yet strong aluminium which can be recycled for the full 100%, requiring very little energy

• Demountable panels, which allows full access to services and equipment in plenum
• Different joint options: Recessed U-Joint (20mm), Recessed V-Joint (20mm) and Softwave panel (70mm wide)
• Base Material: Luxalon® Multi-Panel ceiling panels are rollformed from 0.35 mm (30B), 0.5 mm (30BD / 80B / 130B) or 0.6 mm (180B) thick prepainted stove enamelled aluminium strip, alloy HD5050 or equivalent (according to EN 1396, and ECCA standards)
• Coating: the tough and durable 2-layered polyester finish in a nominal thickness of 20 microns, is stove enamelled in a continuous coil-coating process ensuring uniform coating thickness and absolute adhesion.

Fire behaviour

Luxalon® metal suspended ceilings are classified incombustible and will therefore not contribute to possible fires. When ceilings however need to protect the structural integrity of the building, Luxalon® ceilings offer a range of practical and tested solutions with regards to fire resistance and fire stability. Further information is available on request.

Material per sqm

Construction details

Edge profiles